NH Dabung 85 HP Tractor Price & Specifications 2020 Model


Fiat NH Dabung 85 HP Tractor was launched by AL Ghazi Tractors Limited in April 2016. Check new improved model 2020 price, specification and reviews of Dabang 85 tractor. AGTL manufactured this new model by modification of New Holland NH 640 SP tractor. This is 85 horsepower tractors has been made with strong rear portion. AGTL share in the segment of 85HP was negligible for covering and snatching the share Dabung tractor was launched.

nh dabung 85 hp tractor

NH Dabung 85 HP Tractor Price 2020

Booking rate / Ex – Factory price of New Holland Dabung tractors is given below. For Booking of your tractor contact us or comment below your query. Price revised on 28th July 2020.

Price in PKR

Rs. 1,479,450/-

NH Dabung 85 HP Tractor

Improvements in Dabung 85 HP Model 2020:

NH Dabung 85 HP Tractor had some issues in its rear portion, especially in gearbox and differential casing. The company has improved the new model and it is available in the market for sale. Check below all changes made in Dabung 85HP tractor in Urdu.

nh dabung new model

dabung 85 tractor 2020model

NH Dabung 85 HP Tractor Specifications


At flywheel 85 HP


New Holland 8045.05

4-Stroke, direct injection diesel engine

Number of cylinder: 4

Bore and stroke: 104 x 115 mm

Piston Displacement: 3,908 cc

Flyweight type dynamic balancer.

Compression ratio: 17:1

Max. Power at 2,600 rpm: 85 HP

Max. Torque at 1,600 rpm: 29.7 kgm

Dry-type cylinder liners.

Cooling system: water

Five-row, brass tube and copper fin radiator

Forced-feed lubrication system.

Two power outlets for hydraulic pump on timing


Distributor type fuel injection pump with

mechanical Speed Governor.

Exhaust Muffler: Vertical

Five bearing crankshaft

Oil Cooler


Air: Oil-bath with pre-cleaner

Fuel: 2 replaceable cartridges;

Oil: Easy-to-change, continuous-flow cartridge


Dual plate, dry-type with separate controls (pedal

for transmission and hand lever for PTO),

Diameter of plates: 11 inch

Cera Metallic Clutch Plate.


Front: 7.50-16 Rear: 18.4/15-30


Fully upholstered, with parallelogram suspension,

adjustable, foot step for ease.


Front lifting hood. Three side access to Engine for

ease of maintenance.


3-position headlights; (parking, low & high beam).

Blue high beam warning light on instrument panel.

Adjustable head light mounted in the front grill,

indicators, parking & hazard lights.


12 Volt starting system, 4hp (3KW) starter motor.

400 Watts alternator, 108 ah battery. 7 pin

connector for trolley. Cold Starting aid, Provision

for mobile charger and MP3.


Separate temperature, fuel gauge & hour meter.


Fuel tank: 65 l

Engine oil: 11.5 l

Hydraulic Transmission: 29 l

Rear Axle: 4 l at each side

Air Cleaner: 1 l

Power Steering: 2 l




Gearbox with constant-mesh gears:

8 forward and 2 reverse speeds.

Synchromesh on 3rd, 4th, 7th and 8th speeds

Double control lever

Differential lock with pedal actuated and automatic


Spur gear final drives.

Gear Box mounted starter safety switch.


Inverted U section, telescopic type, front weight 160kg.


Front (8 positions):

1.320 – 1,420 – 1,520 – 1,620

1,720 – 1,820 – 1,920 – 2,020 mm.

Rear (8 positions):

1,320 – 1,420 – 1,520 – 1,620

1,720 – 1,820 – 1,920 – 2,020 mm.


Hydrostatic power steering.

Minimum turning radius:

-with brakes: 3,600 mm

-without brakes: 4,400 mm


6 spline shaft – 35 mm dia / 1 – 3 8”

Fully independent: 540 rpm at 2,160 engine rpm

High-speed DTO (*) 35 mm dia / 1 – 3 8” same speed as engine.

(*) for application of high speed implements


With draft and position control,

Draft control through top link.

Gear type pump driven from engine crankshaft.

Pump capacity (at 2,400 engine rpm). 26.7 l/min Relief valve opening pressure: 190kg/cm2

3-point linkage Cat I – II

Sway chains.

Lift lever lock bracket.

Max. Lifting capacity: 2,150 kg


Oil immersed disc brakes.

Parking: manual lever on right side of operator.


(With 7.50-16 and 18.4/15-30 tyres) a) Wheelbase: 2,070 mm b) Overall length: 3,330 mm c) Height to top of hood: 1,402 mm d) Height to steering wheel: 1,675 mm

e) Front track (8 positions):

from 1,320 to 2,020 mm

f) Rear track (8 positions):

from 1,320 to 2,020 mm

g) Ground clearance under front axle:

500 mm


Rear seat, Front and Rear Weights, Towing Hook.


Canopy, Swinging Draw bar, DTO pump

applications and Creeper gear.

NH Dabung 85 HP Tractor Reviews

The competitor of this tractor is Millat’s MF 385 tractor. Massey 385 tractor is most selling model in Pakistan. Where there Dabung is sold customers are not 100% satisfied with its performance. NH Dabung 85 HP Tractor is powerful and fuel economic especially for farming purposes like tillage and use of implements. But when we talk about tractor trolley purpose it is not so good yet.

Due to its SG iron (Steel Mix) axle tubes it is being used for haulage purpose in sugarcane areas like District Rahim Yar khan.

Technical Brochure / Specifications of Nh Dabung 85 Tractor:

NH Dabung tractor technical leaflet

Check Also: MF 385 Tractor Price & Specs

Dabung Tractor Demo Video on Loaded Sugarcane Trolley

Check Also: All Tractor Prices 2020


  1. talha
  2. M.Abbas Shakir
  3. farrukh javed
    • Hasnain
  4. ch shahbaz
  5. Tahir abbas
    • admin
      • Afzaal ahmed
  6. amjad
    • shahzad
  7. Ishaq
  8. shahzad
  9. shahzad
  10. Usman mir
  11. Liaqat ali
  12. Alyani Farms Layyah
    • admin
  13. Mobeen
  14. Mobeen
  15. Mutiu Abdul-Azeez
  16. Mutiu Abdul-Azeez
    • Mutiu Abdul-Azeez
  17. Allah bux
  18. Zia
  19. Riaz Ahmed siyal
    • admin
  20. Aamir almani
    • admin
  21. Tahir
    • admin
  22. tahir
    • admin
  23. Rashid Iqbal
  24. Muhammad Numan Latif
  25. Sheeraz Cheema
  26. Aariz Aamir Ali Abbasi
  27. mahmood ahmad
  28. Sanaullah Khan

Leave a Reply